Collection

An important influence on the efficiency and effectiveness of industrial dust collection systems is the design concept of the dust extraction hood. The closer the hood is to the source of the emitted dust, the lower the air flow requirements are, so that only a smaller system needs to be installed. We carry out comprehensive calculations to ensure that we offer you the optimum extraction and collection system for your needs.

Transmission

Taking into account the dynamics of the air flow and economic efficiency constraints, we have established data on the optimum dust transfer speed.

Too low a transfer speed can lead to potential system blockages, while too high a transfer speed requires more installation power and increases the risk of wear and tear on the transfer lines.

Dedusting devices

Due to the wide range of different de-dusting units available, we are able to fulfill all requirements and application scenarios with ease. We can offer

● For each application, dust type and emission class, we select the corresponding filter media;

● Automatic or semi-automatic dust collector self-cleaning systems;

● The correct filtration area for the air flow requirements;

● Treatment of acid gases by injection of neutralizing agents.

Recovery

Dust is collected after filtration in a variety of ways: collection drums, mechanical continuous discharge (counterbalance valves, screw conveyors, rotary valves) or pneumatic transfer.

Air Recirculation

Recirculation is used to minimize heat loss in the winter when dust removal systems are in use and to reduce the load on the air conditioning system in the summer when dust removal systems are in use, however, the reintroduction of air into the work area must be in accordance with specifications.

The nature of the filtered dust is also an important factor in selecting a solution.

Centralized High-Pressure Vacuum Systems

Vacuuming has long been a system of concern for industrial users. Today, the requirements for safety, cleanliness and productivity make high vacuum centralized vacuum systems an effective extension of the dust extraction system. High vacuum CVC systems can do the following.

● Clean floors, production equipment and assembly lines;

● Affect zoning in explosion-proof areas;

● Extract dust directly from the source of portable tools, e.g. sanding and polishing equipment;

● Reducing the risk of fire and explosion in the workplace;

● Improving and enhancing the working environment and productivity.